Nondestructively measures thickness of coatings on metals, quickly and accurately.  Consists of a body (Standard or Advanced) and a probe.

Uses Ultrasound to Measure Coating

Thickness on a variety of substrates. It consists of a body (Standard or Advanced) and a probe.

Dew Point Meter. Measures, calculates and records climatic conditions  accurately. Consists of a body (Standard or Advanced) and probe.

Evaluates the adhesion (pull-off

strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching. 

Pull-Off Adhesion Tester that measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure

Surface profile Gage for Blasted Steel, Textured Coatings, Concrete Profile

Predicts the Cured Thickness of Uncured Powder Coatings

Pulse Type DC High Voltage Holiday Detector

High-Voltige Holiday Detector, Pinhole Tester using continous DC

Replica Tape Reader. Optical probe module for Testex-Press-O-Film. Consists of a body (Standard or Advanced) and a probe

Replica Tape Reader, produces peak-to-valley surface profile height measurements. It consists of a body (Standard or Advanced) and a probe

Calculates the concentration of water-soluble salts on metal surfaces in accordance with ISO 8502-6 (Bresle Method) and ISO 8502-9

Barcol Hardness Impressor (BHI) measures the indentation hardness of soft metals (aluminum, copper, brass), harder plastics and fiberglass

Concrete Moisture Meter - In Situ

Conforms to ASTM F 2170

Measures the indentation hardness of non-metallic materials. Consists of PosiTector body (Standard or Advanced) and probe (SHD A or SHD D)

Ultrasonic Thickness Gage,

uses the non-destructive ultrasonic pulse-echo principle to measure the wall thickness of a variety of materials. It consists of a body (Standard or Advanced) & probe

Portable gloss meter for all surface finishes

Press-O-Film Replica Tape Reader for measuring surface roughness of blast cleaned surfaces using Replica Tape